Skip to main content

New Canada Duties Just Repriced Your Ohio Roof Job

A 50% duty on Canadian mastics, fiberboard and softwood trim took effect October 30, 2026. What it does to an Ohio roofing quote, and what to fix.

Stacks of timber beams and plywood sheets racked inside a joinery workshop beside a saw bench

The Short Version

A 50% duty on Canadian caulking compounds, mastics, resin cements, fiberboard and softwood trim took effect October 30, 2026, so Ohio roof quotes moved on consumable lines first. Publish your allowance and substitution policy on a page your proposal links to, and track cost per booked job instead of cost per lead.

Your October roofing estimates are coming back with a question you did not hear in September: the homeowner wants to know why the material line moved. Nothing in your sales process changed, yet every quote now needs a second conversation before anyone signs.

The cause is a tariff change. On October 23, 2026, President Trump signed a proclamation modifying the additional 50% tariffs on certain Canadian products under Section 338 of the Tariff Act of 1930, and the revised list took effect at 12:01 a.m. Eastern on October 30, 2026. The proclamation added 100 Harmonized Tariff Schedule lines and removed 22. Caulking compounds, mastics, resin cements, nonaqueous acrylic and vinyl polymer paints, certain polyurethane products, fiberboard and continuously shaped coniferous wood all went on the list. For a roofing contractor in Columbus, Cleveland or Cincinnati, those are the sealant on your flashing details, the cover board on your low slope work and the trim on your rake edge.

Roofing contractors can manage the change, and discounting is the wrong response. This article covers what changed on October 30, six ways a 50% duty on consumables shows up in booked job cost before it shows on a material invoice, how the same proclamation lands differently in Ohio, Arizona, Tennessee and Colorado, and what a roofing company should publish so the price conversation happens before the estimator is in the driveway.

50%
Additional Section 338 duty on the listed Canadian goods, charged on top of any Section 232 tariff already owed, effective October 30, 2026
100
Tariff schedule lines the October 23, 2026 proclamation added to the 50% list, while 22 lines came off
$20 billion
Canadian imports covered when the Section 338 tariffs were first announced in July 2026, as reported on October 27, 2026
$25,000
Minimum surety bond Columbus requires for the General Contractor licence an Ohio roofer needs to bid commercial work

What the October 23 Proclamation Changed, and When

The October 23 proclamation kept the tariff rate at 50% ad valorem and changed the products it applies to. The product list is tied to tariff schedule heading 9903.03.14, which the proclamation amended through U.S. note 51 to subchapter III of Chapter 99. One hundred lines came on and 22 came off, and several of the additions sit in the middle of a roofing bill of materials.

The Date That Decides Which Price You Pay

October 30, 2026 is the date that matters, and customs entry is the trigger, whatever the shipment date. The duty applies to goods entered, or withdrawn from a warehouse, for consumption on or after 12:01 a.m. Eastern that day. A pallet of sealant that left a Canadian plant in September and cleared customs on November 3 carries the duty. Your distributor's landed cost therefore depends on paperwork timing you cannot see from the yard counter, which is why two quotes from the same supplier in the same week can disagree.

What Went On the List, and What Came Off

The added lines cluster in chemicals, plastics, wood panels and finishing products, which together make up the consumable half of a roofing job. Reporting by Roofing Contractor on October 28, 2026 named nonaqueous acrylic or vinyl polymer paints and varnishes, caulking compounds, mastics, resin cements and painters' fillings, certain polyurethane products, fiberboard and continuously shaped coniferous wood among the additions. A BDO review of the same proclamation groups the 100 added lines across Chapters 32 to 34, 38 and 39, and 44 and 48.

The removals are narrower than the headlines suggest. The 22 lines cover plastic film and bags, certain plywood at 4412.33 and 4412.34, coated paper and paperboard, and certain packing and agricultural machinery. Two underlying rules work against a contractor. The duty applies even when goods qualify as United States, Mexico and Canada Agreement origin, so a USMCA certificate is no defence, and Section 338 duties are charged in addition to Section 232 tariffs, not in place of them.

The Plywood Headline Does Not Cover an Ohio Roof Deck

The plywood that came off the 50% list is a different product from the plywood that goes on a roof. Subheading 4412.3 covers plywood made solely of wood sheets where each ply is no more than 6 mm thick. Within it, 4412.33 and 4412.34, the two lines the proclamation removed, both describe panels with at least one outer ply of non coniferous wood: the hardwood faced material used in cabinetry and furniture. Softwood panels with both outer plies coniferous, the pine and Douglas fir sheathing a crew nails to a deck, are classified separately at 4412.39 and were not removed. Continuously shaped coniferous wood, the softwood trim and fascia stock an Ohio crew cuts on a rake edge, was added at the same time.

Softwood also arrives with duties already attached. Section 232 placed a 10% tariff on softwood timber and lumber effective October 14, 2025. The Commerce Department's final review results, announced October 14, 2026, set the combined antidumping and countervailing rate on most Canadian softwood lumber at 24.75%, and with the Section 232 tariff on top the all in burden comes to about 34.75%. A Columbus roofer replacing nine sheets of decking on a February tear off pays into that stack on every sheet.

Six Ways a 50% Duty on Consumables Shows Up in Your Numbers

A duty on sealant and fiberboard never appears on a roofing company's profit and loss as a line called tariffs. It shows up as six changes in the numbers, and most of them look like sales or estimating problems when the cause is the material cost.

1. Your Signed Contracts Now Carry a Price You Did Not Quote

Every contract signed before October 23 that starts after October 30 has an unpriced gap in it. Construction attorney Trent Cotney, quoted by Roofing Contractor on October 28, 2026, advised contractors to monitor material pricing, review escalation and substitution clauses, and find out whether specified Canadian products are affected. Most residential roofing agreements carry no escalation clause, because for twenty years they did not need one. Publish the allowance and substitution language on the page your proposal links to, so the homeowner has read the clause before signing.

2. Cost Per Lead Holds Steady While Cost Per Booked Job Climbs

A roofing company's acquisition cost can rise while the advertising account stays unchanged, because the close rate falls even though click prices hold. When a quote needs a second conversation about a material line, the gap between estimate and signature stretches, more estimates go stale, and the same number of leads produces fewer booked jobs. A company watching cost per lead sees nothing wrong for about six weeks, while one watching cost per booked job sees the problem inside two.

3. Repairs Lose Margin Before Replacements Do

A 50% duty on a tube of sealant is a rounding error on a $22,000 replacement and a real cost on a $700 repair. Material is a small share of a replacement and a large share of a small job, so the duty squeezes repair gross margin first and hardest. Stop competing for repairs on price and compete on response time, which costs nothing per job.

4. In Ohio the Deck You Cannot Price Until Tear Off Is the Exposed Line

An Ohio roofing contractor quotes decking as a per sheet allowance because nobody knows what is under the shingles until they come off. Freeze thaw cycling across Columbus, Cleveland, Cincinnati, Toledo and Dayton drives water into valleys and around penetrations, so rotten sheathing turns up on tear offs that looked clean from the driveway. The decking allowance is the line most exposed to the duty stack on softwood, and it is the only number on the proposal that was never fixed. The company that explains it in writing is the one answer engines quote.

5. Ohio Gives a Homeowner No State Licence to Check You Against

When a price moves, a homeowner checks the contractor before checking the price, and Ohio offers nothing statewide to check. Ohio issues no roofing licence. The Ohio Construction Industry Licensing Board licenses HVAC, hydronics and refrigeration, electrical and plumbing contractors, with roofing left off the list, so a roofing business registers with each city it works in. A homeowner in Phoenix can pull a contractor's status and complaint history from one state website, and a homeowner in Westerville cannot.

6. Someone in Your Market Will Discount Through It

At least one roofing competitor in every metro will absorb the duty to hold volume, and that resets what homeowners think the work costs. Matching that price is a mistake, and so is bidding against that competitor for the same clicks. A company absorbing a 50% duty to win a $900 repair is buying a job that loses money. Move budget toward searches where the buyer is choosing a contractor and price is not the only question.

Pull every signed contract with a start date after November 15 and find the material allowance line. If a contract has none, you are carrying a 50% duty on materials you have not bought yet, for work you have already priced.

Where the October 30 List Lands Hardest in Ohio, Arizona, Tennessee and Colorado

The October 30 tariff list creates four different problems in Ohio, Arizona, Tennessee and Colorado, because each state puts a different rule between a price increase and a signed contract. Ohio has the consumable exposure and no state licence for a homeowner to check. In Arizona, one of the added product families is a common roof system. Tennessee has a dollar threshold that its licensing law turns into a credential question. Colorado has a statute deciding who pays for material ordered against a claim that is later denied.

Ohio: Freeze Thaw Consumables and a Verification Gap

Ohio roofing revenue runs through the details, and the details are what got more expensive. Freeze thaw cycling is the main failure mechanism across Columbus, Cleveland, Cincinnati, Toledo and Dayton. It rarely fails a shingle field; it fails a valley, a chimney flashing, a pipe boot or a step flashing. Those repairs are built from caulking compounds, mastics and resin cements, three of the categories that joined the 50% list on October 30, 2026.

Decking is the second Ohio exposure and the more dangerous one, because it is the number on the proposal that was never fixed. An Ohio tear off in a storm restoration market finds rotten sheathing only after the shingles are gone, so decking is quoted per sheet. The two plywood lines the proclamation removed cover panels with a non coniferous outer ply, and the softwood sheathing a crew actually nails down is classified elsewhere. The relief in the headline never reaches a roof in Hilliard or Parma, and the coniferous trim stock used on a rake edge was added on the same day.

The Ohio price conversation is harder than the Arizona one because Ohio gives the homeowner nothing central to check, so verification happens city by city. Columbus requires a Home Improvement Limited Contractor licence for residential roofing and a General Contractor licence with a minimum $25,000 surety bond for commercial work, both through the Department of Building and Zoning Services. Cleveland and Cincinnati each require contractor registration inside city limits. The Ohio Department of Insurance handles the claim side but will not tell a homeowner whether you are registered in their city. A company chasing roofing leads in Ohio therefore has to show its own proof on its own pages.

State Which added line sits in your typical job What the local rule does when the price moves First move this week
Ohio Caulking compounds, mastics and resin cements on freeze thaw flashing work, plus softwood decking that the plywood removal does not cover No statewide roofing licence exists, so a homeowner verifies you city by city in Columbus, Cleveland and Cincinnati, or not at all Publish the per sheet decking allowance and your city registrations on the page your proposal links to
Arizona Certain polyurethane products and nonaqueous primers, which on a Phoenix or Tucson foam roof make up the roof system itself The Registrar of Contractors publishes status, classification and complaint history, so your R-42 or C-42 record answers the trust question Reprice foam and recoat scopes separately from tile and shingle before the next round of bids
Tennessee Fiberboard and continuously shaped coniferous wood on high volume new construction around Nashville and Memphis The $25,000 licensing threshold turns a material increase into a credential problem on jobs that used to sit just under it Reprice every job quoted between $21,000 and $25,000 and check which licence it now needs
Colorado Mastics, resin cements and softwood trim on Front Range hail replacements ordered against an open claim C.R.S. 6-22-104 lets the owner rescind within 72 hours of a written claim denial, and the contractor keeps only what covers work actually performed Stop ordering newly dutied material until the carrier's written decision is in hand

Arizona, Tennessee and Colorado: Three Different Pressure Points

Arizona is the only one of the four states where an added product family is the roof system itself. Spray polyurethane foam is a mainstream low slope roof in Phoenix, Tucson, Mesa and Scottsdale, sold as a sprayed assembly with a protective top coat and a recoat cycle, and both certain polyurethane products and nonaqueous acrylic paints joined the 50% list on October 30, 2026. An Arizona roofing company therefore faces a price increase on what it sells as well as on what it consumes. Arizona does give contractors something Ohio does not: the Registrar of Contractors licenses roofing under R-42, C-42 and CR-42 and publishes a public search showing licence status, classification and complaint history.

Tennessee is the only state on this list where a material increase becomes a licensing question. The Tennessee Board for Licensing Contractors, part of the Tennessee Department of Commerce and Insurance, requires a state contractor licence to bid any job worth $25,000 or more, and each licence carries an assigned monetary limit. Below that threshold, residential roofing from $3,000 to just under $25,000 runs on a Home Improvement licence in named counties, including Davidson for Nashville and Shelby for Memphis. If fiberboard and trim increases push a $23,000 Nashville reroof past $25,000, the job no longer fits the licence that was adequate in September.

In Colorado, ordering material early is a risk written into statute. Front Range hail replacements in Denver, Colorado Springs and Fort Collins are sold against an open insurance claim, and C.R.S. 6-22-104 gives a property owner seventy two hours to rescind a residential roofing contract after written notice that the claim was denied in whole or in part. On rescission, the contractor returns payments within ten days and may keep only the amount covering work actually performed, with claims preserved for materials ordered and actually installed. Material still sitting on a trailer has not been installed, so a Colorado roofer who pre orders newly dutied mastics carries the cost of that inventory alone.

Pre Framing the Price Before the Estimator Arrives

The cheapest place for a roofing price conversation is a web page, several days before anyone knocks on a door. A homeowner who has read why a material line moved arrives with the objection already answered. A homeowner who first hears about it across a kitchen table treats it as a negotiation. The content is identical in both cases, and the timing decides the close rate.

Write the Policy, Not the Apology

A pricing page that explains how the tariff works persuades more homeowners than one that apologises for a number. Name the October 23 proclamation and the October 30 effective date and say which material categories it touches. Then state your policy plainly: what is fixed in the contract, what is an allowance, how an allowance is measured, and what happens if a supplier reprices between signature and start. Make the page specific enough that a homeowner cannot get the same answer from a cheaper source.

Put the Numbers Where an Assistant Can Read Them

Homeowners now ask an AI assistant about a price before they call a second contractor, and assistants answer from pages that state facts plainly with dates attached. An assistant can quote a whole paragraph that says the duty is 50%, that it took effect on October 30, 2026, that it covers caulking compounds, mastics and certain polyurethane products, and that softwood decking was left out of the plywood relief. A paragraph saying material costs are rising due to global factors gives it nothing to quote.

Write one page that answers the question homeowners are already typing: why did my roof quote go up? Date it, explain the cause, state your allowance policy, and link it from every proposal you send.

What Replaces Competing on the Material Number

Roofing companies that come through a cost shock intact sell certainty about the price instead of the price itself. Sharper buying cannot beat a duty that moves on seven days' notice, because every contractor in the metro buys from the same distributors at roughly the same landed cost. What a contractor can reduce is the homeowner's uncertainty, and that comes down to content and operations, with purchasing playing a small part.

Sell the Scope in Writing Before the Price

When prices are moving, a detailed scope wins more jobs than a low number. Specify the decking allowance per sheet, the sealant and flashing specification, the substitution rule and the validity window, and the homeowner is comparing a defined proposal against a vague one. The vague proposal loses even when it is cheaper.

Shorten the Gap Between Estimate and Signature

Speed protects a roofing company against a moving material price. Every day between estimate and signature is a day the landed cost can shift underneath your number. A company that cuts that gap from eleven days to four needs an escalation clause far less often, because fewer quotes outlive the costs they were built on. Same day proposal delivery and automated follow up on day one and day three cost less to build than a price increase costs to defend.

How Leadnox Helps Roofing Contractors Hold Price

Leadnox builds the demand and the published proof that let a roofing company raise a number without losing the job. Our trade division works only with roofing and HVAC contractors in the United States, so we already know how a contractor's margins work before we spend your budget. In our view, the companies that lose ground in a cost shock are the ones with no published answer to the question their price raises, whatever their prices are.

The Pricing Page That Does the Selling

We build the page a homeowner reads before the estimator arrives. It explains the tariff and its dates, sets out the allowance and substitution policy in the contractor's own words, and lists the city registrations that a homeowner in a state like Ohio has no central way to check. Proposals link to the page and ads land on it. What a contractor should test for is a shorter second conversation and fewer estimates that die in follow up, a gain that shows up in close rate more than in traffic.

Campaigns Measured on Booked Jobs, Not Clicks

We rebuild reporting around cost per booked job before we touch bidding, because in a market where costs are moving, the lead number misleads you for about six weeks. That usually means moving budget out of the cheapest clicks and toward searches where a homeowner is choosing a contractor.

Answers Published Where Assistants Read Them

We write the material cost explanation, the state specific rules and the frequently asked questions so an AI assistant can quote them as a complete answer with your company named. That takes a different skill from ranking a service page. For a roofing contractor in Ohio, Colorado or Tennessee, being the named source for why a roof costs what it does in that state is a position a competitor cannot buy back with a bigger budget.

What to Measure Over the Next Ninety Days

Three numbers show a roofing company whether the October 30 change is costing it jobs or only margin, and most companies do not watch them weekly. Start tracking them in the first week of November so the baseline is clean.

Cost Per Booked Job, Not Cost Per Lead

Cost per booked job is the only acquisition number that reacts when the close rate changes. Pull it weekly and split it by job type. A healthy result is a flat or falling figure while cost per lead rises. A rising cost per booked job against a flat cost per lead is the sign of this problem, and it appears roughly four weeks before the problem reaches revenue.

Days From Estimate to Signature

Estimate age measures your exposure to a moving material price directly. Count the median days from proposal sent to contract signed, by month. Aim for under five days on repairs and under ten on replacements. Anything longer means some of your quotes will outlive the costs they were built on, and the fix lies in your follow up more than in your pricing.

Repair Gross Margin, Separated From Replacement

A duty on consumables shows up first in repair margin, and most roofing companies miss it because they report one blended margin figure. Split repairs from replacements. A healthy result is repair margin holding within two points of its September level. A larger drop means you are absorbing the duty on small jobs and failing to pass it on, and your repair book has become a more expensive lead source than your advertising.

Frequently Asked Questions

Ohio roof quotes rose because a proclamation signed on October 23, 2026 revised the additional 50% Section 338 tariffs on certain Canadian products, effective October 30, 2026. The revised list added caulking compounds, mastics, resin cements, certain polyurethane products, fiberboard and softwood trim. Ohio freeze thaw repairs depend on those materials for flashing, decking and trim details, so Ohio quotes moved on the consumable lines first.

The October 23, 2026 proclamation added 100 tariff schedule lines, effective October 30, 2026, including several roofing materials. Reporting identified nonaqueous acrylic and vinyl polymer paints, caulking compounds, mastics, resin cements, certain polyurethane products, fiberboard and continuously shaped coniferous wood. Coverage depends on the exact classification, so confirm the tariff code with your supplier.

No. The two plywood lines removed from the 50% list, 4412.33 and 4412.34, cover panels with at least one outer ply of non coniferous wood, which is hardwood faced material. Softwood sheathing with both outer plies coniferous is classified separately and was not removed. Continuously shaped coniferous wood was added to the list on the same date.

Construction attorney Trent Cotney advised contractors to review escalation and substitution clauses after the October 2026 revision. The difficulty is residential work, where most agreements have never carried such a clause. Publishing the allowance policy where a homeowner reads it before signing works better than raising the clause at the kitchen table, and an attorney should draft the language.

Not directly. A suit filed at the Court of International Trade in late October 2026 argues the Section 338 requirements were not met and seeks refunds for importers. Any refund would go to the importer of record, which is your supplier and not your roofing company, and litigation runs for years. Price the work you quote now on today's landed cost.

Sources

  1. Fact Sheet: President Donald J. Trump Further Modifies Canadian Products Subject to Tariffs Under Section 338. The White House, 2026-10-23
  2. Scope of 50% Section 338 Tariffs on Certain Canadian Products Revised as of October 30. BDO USA, 2026-10-27
  3. Trump Revises 50% Tariffs on Canadian Building Materials. Roofing Contractor, 2026-10 (exact day not confirmed)
  4. Ambassador Greer Issues Statement on President Trump Imposing Section 338 Tariffs on Canada. Office of the U.S. Trade Representative, 2026-07-20
  5. Softwood lumber. Global Affairs Canada, updated after 2026-10-14
  6. Construction Industry Licensing Board, Ohio (title paraphrased from URL). Ohio Legislative Service Commission, current page, accessed 2026-11-19
  7. Contractor Licenses. City of Columbus, Department of Building and Zoning Services, current page, accessed 2026-11-19
  8. Ariz. Admin. Code R4-9-104 - Dual Contractor License Classifications and Scopes of Work. Legal Information Institute, Cornell Law School, current
  9. Home Improvement. Tennessee Department of Commerce and Insurance, current page, accessed 2026-11-19
  10. Colorado Revised Statutes Title 6. Consumer and Commercial Affairs ยง 6-22-104. FindLaw (statute text), current
  11. Section 338 Tariffs on Imports from Canada Challenged in Court. Sandler, Travis & Rosenberg, 2026-10

Drafted with AI assistance from the public sources listed above. Its figures were checked against those sources on 19 November 2026. How we write. This article is general information for business owners, not legal, tax, medical or financial advice. Rules change and differ by state, so check the source documents or ask a qualified professional before you act on it.

Your Ohio Pipeline Should Not Move With the Price of Sealant

Leadnox builds the demand and the published proof that let roofing contractors in Ohio, Colorado and Tennessee raise a number without losing the job. Booked jobs, not cheaper clicks.

Get My Free Market Audit